-
Mevo Plus Camera
-
Mount
-
Mevo Boost

Mobile Requirements
*Check if your device is compatible before purchasing.
Capture Resolution
Frame Rate
1080p30 at 20Mbps
720p30 at 10Mbps
720p30 up to 3.5Mbps
480p30 up to 1.5Mbps
360p30 up to 1Mbps
720p30 up to 2Mbps
480p30 up to 1.5Mbps
360p30 up to 1Mbps
720p30 up to 3.5Mbps
480p30 up to 1.5Mbps
360p30 up to 1Mbps
*Twitter / Periscope maximum streaming resolution and bitrate is 540p up to 800Kbps
*Ethernet streaming requires Mevo Boost accessory
Audio codec
Wi-Fi
Ethernet
100Mbps ethernet – Requires Mevo Boost accessory
4G LTE via external Verizon USB Modem. Requires Mevo Boost and supported USB Modem on Verizon (US Only). Or via any mobile Wi-Fi hotspot.
Streaming bandwidth requirements
Full HD – Up to 4 Mbps (At least 3 Mbps of steady upload speed recommended )
HD – Up to 3.5 Mbps (At least 2 Mbps of steady upload speed recommended)
SD (Standard Definition) – Up to 1.5 Mbps (at least 800 kbps of steady upload speed recommended).
Check your connection using Speedtest.net before purchasing Mevo for live streaming.
Live streaming modes
(b) Direct from camera when joining a Wi-Fi access point
(c) Hardwire via Ethernet when using Mevo Boost accessory
Yes, IPX4 when mounted to Mevo Boost accessory
Output 5VDC 2.0A
Mevo USB2.0 input: 5VDC, 1.8A
Any USB2.0 battery or Mevo Boost accessory for up to 10 hours of streaming and recording



(for approved USB LTE modems and device charging)

1/4”-20 UNC Tripod Thread (Adapter)
3/8”-16 Microphone Stand Thread (Adapter)
compatible device from USB-A port Output: 5V, 0.5A
Input: 100-240V, 50/60Hz, 0.5A
Output: 5V/2.1A, 9V/2A, 12V/1.5A. 10/18W
Full size USB Plug
Full size USB Plug USB 2.0 plug (Type A connector). To either stream live using an external LTE modem See list of compatible modems or to charge any USB accessory (such as your iPhone being used to control Mevo)